Working Principle: This continuous pulverizer use hammer to hit the material and crush it with grinding teeth, after that, use the mesh screen to filter and blow the fine powder into the cloth bag for collection. This machine is used for dry grain, not for wet and oily grain Detailed Design: Food-grade stainless steel enlarged hopper, clean and stable, can be adjusted by rotating the knob to adjust the speed of the material; stainless steel round smooth spout, smooth and easy to clean the material High Efficiency: The grain mill is equipped with 1.1KW high power motor, the fineness is about 10-120mesh, the grinding fineness can be adjusted, according to the different coarseness and fineness of the hourly output can be up to 1.1lb/0.5kg-11lb/5kg High Cooling Capacity: The mill is equipped with a stainless steel heat shield and a built-in fan, which improves the cooling efficiency of the motor and ensures that the machine can run for a long time Widely Applicable: This machine is designed for clinic, beauty salon, lab, and so on, it can grind salt, coffee, grain, wheat, pepper and soon. It can grind all dry material to powder, only take 10-15 seconds ▼Notice: 1. It is only suitable for dry materials. Wet materials or liquid can cause a breakdown of the machine. 2. It is not suitable for the too light material.
▼Direction for Use: 1.Before the machine is used, please check whether transmission parts are loose or the other abnormity is produced, and the direction of the machine operation should be consistent with the direction shown by the arrow. 2. No-load test is conducted for 1-2 minutes before using the machine. Materials can be fed after the machine is operating normally. Increasing the feeding quantity gradually and obversing the electric current and functioning of the motor. The blanking flashboard can be fixed only after feeding and current balance are normal. 3.Drying the materials or using a coarse screen stencil if the materials are too wet or have poor mobility to cause poor discharging performance. Opening the front cover to replace the screen stencil. The hand wheel must be tightened to ensure the front cover and the case remain sealed. 4. Stopping feeding the materials for 5-10minites to reduce the residual material before shutting down the machine.
▼Parameters: Spindle Speed: 7000r/min Material Limit Size: 5*5*5mm Production Capacity: 0.5-5kg/h (1.1lbs-11lbs) Working Noise: 85db Direction of Rotation: Clockwise Voltage: 110v Motor Power: 1.1KW Overall Dimension: 560*380*820mm(22"*14"*32") Crushing Fineness: 10,20,30,40,50,60,80,100,120 mesh The screen is 10 mesh, ship with original package. If you need other mesh size, please contact us.
▼Item Included: 1 set of universal pulverizer SF130(150022)
