【FITMENT】Fits For Chrysler Town and Country 2004-2007, Dodge Caravan/Grand Caravan 2004-2007. For Full Compatible List, Please Check Our Product Description and Vehicle Fitment Tool. 【REFERENCE NUMBER】Replacement for P/N: M3N5WY72XX, 315Mhz. 【PROGRAMMING】For many people, the key programming process is a bit cumbersome, so you need to find a professional locksmith to help cutting and programming. If you have 2 working original keys you will be able to program these remote key from home with easy to follow instructions. 【WHAT YOU GET】Complete keyless remote with electronic board and battery, 100% brand new, never used replacement part ( Every single remote is tested before it is sent to make sure it is transmitting ) 【SERVICE】We provide you with 100% satisfaction. If you have any quality and programming problems within a month, you can find our customer service for your return or exchange. 【PACKING】2 X Keyless Entry Remote Start Control Remote Key Fob with Electronics and Battery. Replace your Old or Broken Remote Key Fob for Less
An inexpensive replacement for your original remote key fob, this car key replacement is compatible with
a selection of Chrysler and Dodge vehicles. Each fob key has been pre-tested to ensure functionality and
that signals are transmitting properly. The keyless remote key is self-programable if you already have 2 working
original keys that start the engine. The key blade will need to be cut by a qualified locksmith or dealer.

Compatible with:
2004 2005 2006 2007 Dodge Caravan
2004 2005 2006 2007 Dodge Grand Caravan
2004 2005 2006 2007 Chrysler Town & Country

How to Program your Key Fob Replacement:
1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turnignition to
OFF and remove key.
2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately
10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear
an audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you
should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.
4. For each additional key you must repeat these steps starting with step number 1.