【Parameter】Voltage:AC110V 60 HZ; Power:25W; Max Speed: 4000r/min; Time rang:0~60min or without limit; Maximum relative Centrifugal force: 1790×g; Capacity:20ml×6. 【Easy-to-Use Timer & Speed Control】1.Press the timer button, wait for the “beep,” and set your desired time. 2.Gradually adjust speed from low to your required setting for safe and precise operation. Tip: The timer does not reset automatically—always set it to “0” before starting a new run. 【6 Tubes More Efficency】The centrifuge can hold 20mlX6 tubes one time. Tubes must be loaded symmetrically to ensure balance. Do not operate with uneven or empty positions. 【Wide Appplication】This centrifuge can be used in various fields such as biology, medicine, chemistry, food, education, beauty, life science, etc. It mainly be used for the appraisal radioactivity and separate cell or particle. 【Safety & Care】Before next use, be sure to confirm that all settings (timer and speed) have been reset to zero. Keep cover closed during operation. Store clean, dry, and ventilated for long-lasting performance. Features:
Equipped with speed and timer control to meet your requirement
Safe, compact and quiet to use
Include 6pcs centrifuge tubes of 20ml capacity each
Widely used in the laboratory, medical, chemistry and so on
Specification:
Voltage:AC110V 60 HZ;
Power:25W;
Max Speed: 4000r/min;
Time rang:0~60min
Capacity:20ml×6
Maximum relative Centrifugal force: 1790×g
Using Description
1.Put the machine on a level and strong table and keep the woring room clean, dry and ventilated. Indoor tempeture 5-32°is ok。
2.Clean die rotor and container before operating.
3.Put the test tube(with the same weigjt) into the centrifugal hole.
4.Put down the cover of the machine, adjust the timer as you requirement and turn on the power switch.
5.Adjust the speed knob as your requirement.
6.The motor iwll automatically stop supplying the electricity if oprn the cover during the working time.
7.After finishing the work, adjust file speed knob to file lowest position and turn the timer to 0, and then cut off the power supply.
8.Clean the container and rotor, then put dowen the cover.
