With 0-1-2-3-4-5-6-7-8-9 functions. It will come with one paper of manual and offer technic support. Slow start and slow down time can be set; with speed upper limit lower limit setting Optional manual and automatic modes;The automatic mode is fully automatic forward and reverse rotation within the set time Touch the switch to switch forward and reverse, jog acceleration and deceleration to solve the problem of the traditional potentiometer easy to damage LCD screen with backlight capable of displaying working time, speed percentage, current mode, forward/reverse state. Input voltage: DC10-55V
Output voltage: linear under load
Instantaneous current: 60A
Continuous current: within 40A
Speed control type: flow adjustment
Speed control mode: jog + -
Speed range: 0 - 100%
Control frequency: 15KHZ
Wiring type: fence terminal block
Support motor: brush motor
Reverse time setting in full-automatic mode Press the MENU key 10 times to enter the function setting interface (reverse time setting in full-automatic mode), the default is the maximum time 0 hours 0 minutes 10 seconds; FWD / REV key can switch hours, minutes and seconds; press +-to adjust the time minutes and seconds ; Press RUN / STOP to save and exit.
Stop rotation time setting in fully automatic mode Press MENU key 9 times to enter the function setting interface. The default is the maximum time 0 hours 0 minutes 0 seconds. Press FWD / REV key to switch between hours, minutes and seconds, press plus or minus to adjust hours, minutes and seconds, press RUN / STOP to save and exit
Forward rotation time setting in fully automatic mode Press the MENU button 8 times to enter the function setting interface, the default is the maximum time of 0 hours 0 minutes and 10 seconds, press the FWD / REV button to switch between hours, minutes and seconds, press the plus or minus to adjust the hours, minutes and seconds, press RUN / STOP to save.
Motor total running time setting: Press the MENU key 7 to enter the function 6 key surface. The default time is 99 hours, 59 minutes, and 59 seconds. The FWD / REV key switches between hours, minutes, and seconds.
Acceleration / deceleration value setting: Press the MENU key 6 times to enter the function 5 setting interface; Press the plus or minus key to set; Press RUN / STOP to save and exit. Note: Each time you press the plus or minus key, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.
