STOP WORRYING ABOUT A LEANING TV – Heavy-duty arms and a wide wall plate carry displays up to 110 lbs without sag, and a ±5° post-install leveling adjustment corrects the picture once the TV is already hanging. Fully tighten every bolt, including the rear hex screw, before you let go. CHECK YOUR FIT BEFORE YOU BUY – VESA compatibility runs from 100x100mm up to 800x400mm, covering most 40 to 80 inch flat-panel TVs. Measure center to center between the four mounting holes on the back of your TV, horizontally then vertically, in millimeters, to confirm your pattern matches. PULL THE SCREEN OUT OF A CORNER OR RECESS – The arm extends from 3 inches at the wall out to 40 inches, swivels a full 180 degrees, and tilts +5 to -10 degrees. Reach TVs set back in a fireplace niche or angled into a corner without adding a bulky stand. AIM THE PICTURE AT EVERY SEAT IN THE ROOM – Swivel toward the kitchen, the couch, or a second sitting area, and tilt down to cut glare from windows and overhead lighting. Full motion means the TV moves to match wherever you're sitting, instead of the other way around. EVERYTHING YOU NEED IS IN THE BOX – Mounting hardware, a paper template, and instructions are included for 16 or 24 inch stud spacing, with an estimated 45-minute install. Given the arm's reach and the mount's total weight, a second pair of hands makes the lift easier. BUILT FOR THE ROOM AND THE PERSON INSTALLING IT – Living rooms, bedrooms, and fireplace nooks at home; conference rooms and common areas on site. Straightforward enough for a first-time DIY installer, with the range professional AV installers need for tricky corner and recessed placements. BACKED FOR AS LONG AS YOU OWN IT – A lifetime manufacturer warranty and US-based product specialists stand behind every mount. The wall plate is rated for wood studs, metal studs, solid concrete, concrete block, brick, and brick veneer, giving almost any wall a secure anchor point.