CONNECT your HDMI video source to the Minimod-2 hdmi input INJECT the coax cable output from the Minimod-2 to your TV Distribution Coax Cables SET CHANNEL NUMBER from the minimod color display as well the name you wish for this channel RESCAN your TVs to find your new FULL HD 1080p & Dolby Channel COMBINES with with the Antenna or Cable Signals so you watch TV channels and the Minimod The VECOAX MINIMOD-2 converts your HDMI Video signal from any HDMI source into a real HDTV Channel with Full HD up to 1080p and dolby perfect quality, you can inject from any room to your existing tv distribution cables via the wall tv socket together with the other channels and receive in any other room on any TV by simply rescanning the TVs channel list. It is simple to install, plug n play, for everyone, and works in minutes out of the box anywhere, compatible to any regular digital tv. Connect your HDMI Source, Set the Name you want for this channel on our color display, connect to the TV Wall socket or directly to the tv distribution box, and find your HDTV Channel on all TVs. Setup is simple via the color display, where you can change name, channel number ( any atsc air or qam cable, all with no limits ). The MINIMOD 2 is the perfect video distribution extender solution, using the existing cables, to unlimited tvs, without requiring any part behind the tvs. Main Specs : Universal HDMI Input up to 1080p resolution @ 60 frames per seconds Full HD - Mpeg2 1080p Full HD Video Encoding & Dolby Sound - Closed Caption can be activated directly on the video source visible through the HDMI signal so it passes the unit to the destination TVs as part of the video - display selectable QAM Cable & ATSC RF Out Agile ( 30 Mhz to 951 Mhz ) - Can set any destination TV Channel number from 1 to 9999 - Can set the wanted Channel Name - RF Level Out +45dB mV ( can drive 1000+ FT of coax without the need of re-amplify and drive an unlimited number of simultaneous televisions ) watch ytb video nbbsBZym0vg